This BMW required attention to multiple interior surfaces after regular use for business travel. We started with vacuuming all carpets and floor mats, then applied hot water extraction to remove embedded dirt. The leather seats received a pH-neutral cleaner followed by a conditioning treatment to restore suppleness. Dashboard and door panels were cleaned with appropriate products for plastic and vinyl surfaces. Air vents were detailed using specialized brushes, and the steering wheel was sanitized. The final step included glass cleaning for all interior windows.

The black paintwork on this Mercedes showed typical wear from automated car washes - fine scratches and swirl marks visible in direct sunlight. We began with a thorough hand wash using the two-bucket method, followed by clay bar treatment to remove bonded contaminants. Paint correction involved two polishing stages: first with a cutting compound to remove deeper marks, then with a finishing polish for clarity. After paint correction, we applied a ceramic coating that bonds to the paint surface, providing protection against UV rays, bird droppings, and minor scratches. The wheels were cleaned separately using acid-free wheel cleaner, and tires received dressing for appearance.

Pre-sale preparation requires attention to every aspect of the vehicle. For this Audi, we performed complete interior cleaning including all seats, carpets, and trim pieces. The headliner was cleaned using low-moisture techniques to prevent sagging. Exterior work included paint decontamination, single-stage polish, and wax application. The engine bay was degreased and dressed to improve appearance during inspections. Headlights showed yellowing from UV exposure, so we used a restoration process involving sanding and polishing to restore clarity. All exterior plastics and rubber seals were treated with appropriate protectants. The boot area received special attention as it showed signs of cargo transport.

Light-colored leather requires careful treatment to avoid damage while achieving cleaning results. This Range Rover had cream leather showing discoloration on the driver's seat bolster and staining on rear seats. We used a soft brush with leather cleaner to work the product into the grain, then extracted dirt with microfiber towels. Stubborn stains required multiple applications. After cleaning, we applied a leather conditioner containing natural oils to prevent cracking and maintain flexibility. The conditioning process was repeated on all leather surfaces including door panels and center console. We finished with a leather protector that creates a barrier against future staining. The carpet and floor mats were steam cleaned, and all plastic trim was cleaned and dressed.

This sports car needed protection for its metallic silver finish while maintaining the factory paint condition. We started with a pH-neutral hand wash using the two-bucket method to minimize scratching. After drying, we used a clay bar to remove bonded contaminants that washing alone cannot eliminate - this included iron particles, tree sap, and industrial fallout. The paint surface was then inspected under LED lighting to assess its condition. Since the paint was in good condition, we proceeded directly to wax application without polishing. We applied a high-quality carnauba wax in thin, even layers, allowing proper curing time between coats. The wheels were removed for thorough cleaning of the barrels and brake components. Tires were cleaned with a dedicated tire cleaner and dressed with a water-based product for a natural appearance.

Winter conditions in the UK leave vehicles with salt residue, mud, and grime that require thorough removal to prevent corrosion. This Golf needed attention to the undercarriage where road salt had accumulated. We used a pressure washer with appropriate settings to clean the underside, wheel wells, and suspension components. The exterior received a full hand wash followed by tar remover for stubborn spots. Inside, the fabric seats had absorbed moisture and developed a musty odor. We used hot water extraction to deep clean the fabric, then applied an odor eliminator that breaks down odor-causing bacteria rather than masking smells. The carpets were similarly treated. After drying, we applied a fabric protector to help repel future spills and stains. All interior plastics were cleaned and the windows were polished for clarity.